What to Inspect if Your Hot Water Service is Not Working

Call Today

Are you trying to locate selective information concerning How to Troubleshoot and Repair an Electric Water Heater?


How to Troubleshoot and Repair an Electric Water Heater
Many contemporary residences make use of an electric hot water heater for their heating system, because of its comfort and also ease of use. Nevertheless, similar to any other electrical appliances, issues might arise with its use, suddenly. It can be truly aggravating to awaken to a cold shower rather than a hot one or having your bathroom with water that isn't warm sufficient or perhaps too warm. Whatever the situation might be, water heater problems can be rather nerve-racking. Thankfully, we have actually made a list of feasible services to your water heater concerns. There are a number of factors that might cause many of these issues, it could be an issue with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you switch off the primary power supply for safety. Whatever the issue is, getting it repaired need to not position way too much of a problem if you adhere to these steps:

Call A Specialist:


If after replacing all damaged parts and also resetting your temperature, the water heater still isn't functioning, you may require to get in touch with a specialist plumber for a professional viewpoint. The problem with your heating unit could be that the hot and cold faucets have actually been changed or it might be undersized for the amount of hot water required in your home. Whatever the situation may be, an expert plumber would certainly help fix the problem.

Check Your Power Supply:


As standard as this might seem, it is extremely necessary. Without adequate power, your hot water heater will certainly not function. So the first thing to do when your water unexpectedly retires is to confirm that it isn't a power problem. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the issue, just transform it on and off again. Replace any type of damaged or damaged fuse. Test the home appliance with power after these modifications to see if it's currently functioning.

Check Your Thermostat:


If your water heater still isn't functioning or the water appearing isn't warm sufficient, you might require to examine the temperature level setups on your top thermostat. Make sure the breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red switch for temperature level reset over the thermostat. This need to assist heat up the water. Transform the breaker back on as well as inspect if the issue has been fixed.

Check the Heating Element in the Hot Water Heater:


If it's not a power trouble, after that try having a look at your heating element if it is still functioning. Examine each of your heating elements to be sure the problem isn't with any one of them. If any of them is defective, replace that component and after that check whether the warm water is back on.

Final thought


Water heater troubles are not always major. Many of them result from minor concerns like a blown fuse or damaged heating element. Changing the malfunctioning parts should suffice. Nevertheless, if you are still unable to address the problem, give a call to your local plumber to find to get it fixed.


What To Do If Your Hot Water Suddenly Stops Working


The water heater tripped the circuit breaker


The occasional power surge can sometimes cause your large appliances to trip their circuit breaker. Head to your electrical panel to see if the switch associated with your water heater needs to be reset


Your water heater’s fuel supply has been shut off.


If you own a gas or propane water heater, someone might have closed the gas valve. Without gas, your water heater can’t heat water. Ensure the valve is in the “open” position (parallel to the gas line, as opposed to perpendicular to it). If you smell gas (a “rotten egg” smell) or hear the hissing sound of a gas leak, evacuate your home at once, notify your utility company from a safe distance away, and contact a professional to repair your gas line.


The water heater’s pilot light is out.


Although newer water heaters no longer have pilot lights, it’s commonplace for older gas water heaters to have them. Typically, you can find instructions for relighting the pilot light somewhere on the side of the water heater tank, in the owner’s manual, or in online instructions from the manufacturer. Of course, you can always consult a qualified plumber regarding water heater pilot light issues as well.


There’s a problem with the water heater’s burner.


  • Wait for the burner to turn off. If you have no hot water, it’s probably off already. Once it’s off, set your water heater’s thermostat to 120°F.


  • Go to a faucet and turn on the hot water. Let it continue to run for a minute or so while you check on the burner.


  • Observe to see if the burner ignites. If it does, you can adjust the temperature as needed while the water still runs. However, the Consumer Product Safety Commission (CPSC) strongly recommends a temperature no higher than 120°F to prevent scalding.


  • If your burner does not ignite, there’s most likely a problem with the thermostat. You’ll need a plumbing professional to repair it.


  • The water heater’s capacity is too small.


    If you own a storage tank water heater, sometimes a couple of showers in a row can use up most of the hot water stored in the tank. Then, when it’s time for the next person to shower, they’ll run out of stored hot water partway through and then they'll experience water not getting hot. You have some options:


  • Wait longer before showering so the hot water can “fill up” again.


  • Upgrade to a water heater with a bigger tank.


  • Switch to an on-demand (or tankless) water heater.


  • Do You Have a Faulty Heating Element?


    Hot water is heated by one or more heating elements that are located at the bottom of the hot water heater. Due to sediment cover, these elements become less effective at heating water. Even without sediment buildup, heating elements can become damaged and inefficient after years of regular use.



    In the event that the hot water heater's heating element fails, the water will be lukewarm throughout the home. You can restore hot water to your home by contacting a plumber or hot water heater technician.

    https://www.albrightsmechanical.com/blog/2021/january/what-to-do-if-your-hot-water-suddenly-stops-work/



    Do you like reading up on Hot Water Heater Repair? Place a remark further down. We'd be glad to listen to your reactions about this page. We hope that you visit us again soon. Liked our entry? Please share it. Help another person find it. Thanks a lot for your time. Visit again soon.




    Give Me A Quote!

    Leave a Reply

    Your email address will not be published. Required fields are marked *